# Accensione luci raspberri pi400 e klipper

**URL:** <https://klipper.discourse.group/t/accensione-luci-raspberri-pi400-e-klipper/5634>\
**Category:** General Discussion\
**Created:** [December 31, 2022, 10:46am UTC](https://klipper.discourse.group/t/accensione-luci-raspberri-pi400-e-klipper/5634 "2022-12-31T10:46:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![simone](https://avatars.discourse-cdn.com/v4/letter/s/cab0a1/32.png) [@simone](https://klipper.discourse.group/u/simone)\
**Post date:** [December 31, 2022, 10:46am UTC](https://klipper.discourse.group/t/accensione-luci-raspberri-pi400-e-klipper/5634/1 "2022-12-31T10:46:05Z")

</div>

### Basic Information:

Printer Model:  
 MCU / Printerboard:  
 `klippy.log`

_Fill out above information and in all cases attach your_ `klippy.log` _file. Pasting your_ `printer.cfg` _is **not** needed_

### Describe your issue: buongiorno forse è fuori argomento ma volevo sapere se c’era una guida per far accendere e spegnere la striscia a led tramite raspberry con klipper? grazie

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [December 11, 2025, 1:58pm UTC](https://klipper.discourse.group/t/accensione-luci-raspberri-pi400-e-klipper/5634/2 "2025-12-11T13:58:20Z")

</div>