# Adjust Max printing Feedrate?

**URL:** <https://klipper.discourse.group/t/adjust-max-printing-feedrate/20918>\
**Category:** General Discussion\
**Created:** [December 26, 2024, 3:00am UTC](https://klipper.discourse.group/t/adjust-max-printing-feedrate/20918 "2024-12-26T03:00:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![retnel](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/retnel/32/8786_2.png) [@retnel](https://klipper.discourse.group/u/retnel)\
**Post date:** [December 26, 2024, 3:00am UTC](https://klipper.discourse.group/t/adjust-max-printing-feedrate/20918/1 "2024-12-26T03:00:28Z")

</div>

### Basic Information:

Printer Model: QIDI PLUS4  
 MCU / Printerboard: ?  
 Host / SBC ?  
 klippy.log FILE WAS TOO BIG?

### Describe your issue:

The touch screen will only let me adjust the Federate to a max of 150%. I like to run at 250% for quick prototype test fit prints. Would I adjust max\_velocity, if so, is there a calculation so I know what the percentage would be?

I have not been able to continue my klipper knowledge for the past year due to a medical issue. Most of my new knowledge I learned back then needs refreshing.

[printer]  
kinematics:corexy  
max\_velocity: 600  
max\_accel: 20000  
max\_accel\_to\_decel: 10000  
max\_z\_velocity: 20  
max\_z\_accel: 500  
square\_corner\_velocity: 8

Thank you,  
Jason

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [February 24, 2025, 3:01am UTC](https://klipper.discourse.group/t/adjust-max-printing-feedrate/20918/2 "2025-02-24T03:01:05Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.