# Another Move out of range error

**URL:** <https://klipper.discourse.group/t/another-move-out-of-range-error/20090>\
**Category:** General Discussion\
**Created:** [November 17, 2024, 1:21pm UTC](https://klipper.discourse.group/t/another-move-out-of-range-error/20090 "2024-11-17T13:21:12Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [November 18, 2024, 2:31pm UTC](https://klipper.discourse.group/t/another-move-out-of-range-error/20090/8 "2024-11-18T14:31:46Z")

</div>

And all of this is explained in the relevant KB articles, in particular [Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1)

If you find anything in there, which needs more details, then let me know. Just be aware that no documentation can potentially cover all cases, as Klipper is a generic firmware that is used on thousands of 3D printers with about the same number of configurations and requirements.

---

_[View the full topic](https://klipper.discourse.group/t/another-move-out-of-range-error/20090)._