# Anycybic I3 Mega/orangepi zero 3/ adxl345/ i2c

**URL:** <https://klipper.discourse.group/t/anycybic-i3-mega-orangepi-zero-3-adxl345-i2c/10868>\
**Category:** General Discussion\
**Created:** [October 7, 2023, 4:13pm UTC](https://klipper.discourse.group/t/anycybic-i3-mega-orangepi-zero-3-adxl345-i2c/10868 "2023-10-07T16:13:59Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\
**Post date:** [December 6, 2023, 5:07pm UTC](https://klipper.discourse.group/t/anycybic-i3-mega-orangepi-zero-3-adxl345-i2c/10868/6 "2023-12-06T17:07:50Z")

</div>

> [@Fysetc portable input shaper adxl345: spi must be on same muc](https://klipper.discourse.group/t/fysetc-portable-input-shaper-adxl345-spi-must-be-on-same-muc/11938/7):
>
> Understand. I’ll check and reply if working or not. Why their default file like this i don’t know…

matanel83 had similar problems.

Good luck, hcet14

---

_[View the full topic](https://klipper.discourse.group/t/anycybic-i3-mega-orangepi-zero-3-adxl345-i2c/10868)._