# Artillery sidewinder x1 problem with printer config?

**URL:** <https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481>\
**Category:** General Discussion\
**Created:** [May 18, 2023, 7:46pm UTC](https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481 "2023-05-18T19:46:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dvm2003](https://avatars.discourse-cdn.com/v4/letter/d/ecb155/32.png) [@dvm2003](https://klipper.discourse.group/u/dvm2003)\
**Post date:** [May 18, 2023, 7:46pm UTC](https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481/1 "2023-05-18T19:46:53Z")

</div>

### Basic Information:

Printer Model: Artillery Sidewinder x1  
 MCU / Printerboard: Original MKS Gen L v1.0, BLTouch Waggster mod  
 `klippy.log`  
[klippy.log](https://klipper.discourse.group/uploads/short-url/ta0ABj7OCOziIQeigNS5fDenURR.log) (1.1 MB)

### Describe your issue:

…Having a disaster of a time getting Klipper set up on my Sidewinder X1. Have tried multiple config files and adjusted parameters and still printer head begins to violently shake back and forth on X axis with a loud grinding noise when home button is pressed. Unable to get the toolhead controls functional other than home buttons. Any help is appreciated since I am just trying out klipper and failing miserably! Thank you in advance for your time and help!

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [May 18, 2023, 8:11pm UTC](https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481/2 "2023-05-18T20:11:04Z")

</div>

Hello @dvm2003 !

Check if the endstops are assigned to the correct pins:

[https://www.klipper3d.org/Config\_checks.html#verify-endstops](https://www.klipper3d.org/Config_checks.html#verify-endstops)

In all, you may walk through all the points:

[https://www.klipper3d.org/Config\_checks.html](https://www.klipper3d.org/Config_checks.html)

---

<div class="post-metadata">

**Author:** ![dvm2003](https://avatars.discourse-cdn.com/v4/letter/d/ecb155/32.png) [@dvm2003](https://klipper.discourse.group/u/dvm2003)\
**Post date:** [May 18, 2023, 9:45pm UTC](https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481/3 "2023-05-18T21:45:45Z")

</div>

I did check the endstops and they seemed to be working fine. I checked the stepper motors and the extruder motor. Thanks for trying to help!

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [May 19, 2023, 6:31am UTC](https://klipper.discourse.group/t/artillery-sidewinder-x1-problem-with-printer-config/8481/4 "2023-05-19T06:31:28Z")

</div>

There is this in the logs:

```auto
No trigger on x after full movement

```

Check if the endstop can be triggered by the printhead.  
Does the printhead move towards the printhead when homing.