# AXIS\_TWIST\_COMPENSATION cannot find config

**URL:** <https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158>\
**Category:** General Discussion\
**Created:** [January 5, 2025, 4:22pm UTC](https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158 "2025-01-05T16:22:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![deemee](https://avatars.discourse-cdn.com/v4/letter/d/e47774/32.png) [@deemee](https://klipper.discourse.group/u/deemee)\
**Post date:** [January 5, 2025, 4:22pm UTC](https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158/1 "2025-01-05T16:22:46Z")

</div>

### Basic Information:

Printer Model: Sovol SV-06  
Host / SBC: Raspberry Pi 3 Model B Plus Rev 1.3  
[klippy.log](https://klipper.discourse.group/uploads/short-url/nZcTwgqvRYCtFgDtGORO836Vr56.log) (29.6 KB)

Hi,  
I am trying to run [Axis Twist Compensation - Klipper documentation](https://www.klipper3d.org/Axis_Twist_Compensation.html) on my Sovol SV-06 trying to solve the first layer adhesion issue in one corner of the bed. However, I get the following error.

```auto
AXIS_TWIST_COMPENSATION for X axis requires
calibrate_start_x, calibrate_end_x and calibrate_y
to be defined

```

Somehow the configs are defined, but ignored. Any help is much appreciated. Thank you!

---

<div class="post-metadata">

**Author:** ![deemee](https://avatars.discourse-cdn.com/v4/letter/d/e47774/32.png) [@deemee](https://klipper.discourse.group/u/deemee)\
**Post date:** [January 5, 2025, 5:16pm UTC](https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158/2 "2025-01-05T17:16:36Z")

</div>

Turns out the error was misleading. The config didn’t account for the probe offset, and `calibrate_start_x: 0` was taken as no config for some reason. After changing it to `calibrate_start_x: 1` I got “movement out of range” error, and was able to correct the coordinates.

---

<div class="post-metadata">

**Author:** ![eyes99](https://avatars.discourse-cdn.com/v4/letter/e/dc4da7/32.png) [@eyes99](https://klipper.discourse.group/u/eyes99)\
**Post date:** [January 5, 2025, 9:08pm UTC](https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158/3 "2025-01-05T21:08:10Z")

</div>

I was also running into this issue, not sure if it was a Klipper update thats caused it as I was previously running without issue.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [February 5, 2025, 7:08am UTC](https://klipper.discourse.group/t/axis-twist-compensation-cannot-find-config/21158/4 "2025-02-05T07:08:49Z")

</div>

Closed on February 5, 2025, 7:08am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.