# Bed Calibration Error **URL:** https://klipper.discourse.group/t/bed-calibration-error/8128 **Category:** General Discussion **Created:** [April 30, 2023, 11:54am UTC](https://klipper.discourse.group/t/bed-calibration-error/8128 "2023-04-30T11:54:00Z") **Posts on this page:** 1 **Showing post:** 2
### Author: ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos) #### Post date: [April 30, 2023, 12:29pm UTC](https://klipper.discourse.group/t/bed-calibration-error/8128/2 "2023-04-30T12:29:48Z")
> [@Move out of range: X Y Z \[E\]](https://klipper.discourse.group/t/move-out-of-range-x-y-z-e/6637): > > Move out of range: X Y Z [E] Background A movement beyond the physical limits was attempted. Also refer to [Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1)Reasons A direct movement command (G1 et al.) tried to move to a location that is beyond the limits An indirect movement correction (e.g. bed mesh or gcode offsets) pushed the movement target beyond the physical limits Potential solutions How to determine the offending axis Check the X, Y or Z coordinates given in the error message and compa… --- _[View the full topic](https://klipper.discourse.group/t/bed-calibration-error/8128)._