# BIQU B1 SE PLUS - Klipper config **URL:** \ **Category:** General Discussion\ **Created:** [January 18, 2022, 1:46pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794 "2022-01-18T13:46:35Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![mackna](https://avatars.discourse-cdn.com/v4/letter/m/8e7dd6/32.png) [@mackna](https://klipper.discourse.group/u/mackna)\ **Post date:** [January 18, 2022, 1:46pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/1 "2022-01-18T13:46:35Z")
Hi, Anyone successfully installed Klipper on B1 SE PLUS? Can´t get the Z home probe to work and i´m totalt new to klipper also. ---
**Author:** ![andyftp](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@andyftp](https://klipper.discourse.group/u/andyftp)\ **Post date:** [January 29, 2023, 4:20am UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/2 "2023-01-29T04:20:56Z")
same here, I’m interested in your outcomes. I just got this printer and am interested in flashing klipper ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [January 29, 2023, 7:26am UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/3 "2023-01-29T07:26:33Z")
> [@mackna](#): > > Klipper on B1 SE PLUS > ---
**Author:** ![andyftp](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@andyftp](https://klipper.discourse.group/u/andyftp)\ **Post date:** [January 30, 2023, 7:21pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/4 "2023-01-30T19:21:40Z")
> [@Sineos](#): > > ```auto > running "make", copy the generated "out/klipper.bin" file to a > # file named "firmware.bin" on an SD card and then restart the SKR 2 > # with that SD card. > > # See docs/Config_Reference.md for a description of parameters. > > [mcu] > serial: /dev/serial/by-id/usb-Klip > > ``` Thanks Sineos. Curious I’ve seen some SKR2 board configs ([like used on the voron printer](https://github.com/VoronDesign/VoronUsers/tree/master/firmware_configurations/klipper/TechnoPhreak/BTT_SKR_v2)) and the instructions involve changing jumpers on the board. I didn’t notice this requirement for the B1 SE Plus, which uses the same board. So curious if that needs to be done. Also curious if the TFT screen on the B1 SE Plus works with klipper. ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [January 30, 2023, 7:30pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/5 "2023-01-30T19:30:00Z")
These jumpers are used to set the correct TMC driver communication bus. Apparently the B1 seems to use TMC2208 and the Voron TMC2209. I’d not touch the jumers unless you know what you are doing > [@andyftp](#): > > Also curious if the TFT screen on the B1 SE Plus works with klipper. Seems to be a touch screen. So pretty surely not. ---
**Author:** ![andyftp](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@andyftp](https://klipper.discourse.group/u/andyftp)\ **Post date:** [January 30, 2023, 8:00pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/6 "2023-01-30T20:00:10Z")
Thanks! The B1 SE Plus uses a TMC2225 according to my ticket w/ Biqu, but I gather its essentially a TMC2208 with some additional feature. ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [October 1, 2025, 4:33pm UTC](https://klipper.discourse.group/t/biqu-b1-se-plus-klipper-config/1794/7 "2025-10-01T16:33:05Z")