# Bl touch and Z Tilt **URL:** \ **Category:** General Discussion\ **Created:** [December 21, 2023, 5:50am UTC](https://klipper.discourse.group/t/bl-touch-and-z-tilt/12461 "2023-12-21T05:50:46Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Djripper666](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/djripper666/32/8551_2.png) [@Djripper666](https://klipper.discourse.group/u/Djripper666)\ **Post date:** [December 21, 2023, 5:50am UTC](https://klipper.discourse.group/t/bl-touch-and-z-tilt/12461/1 "2023-12-21T05:50:46Z")
### Basic Information: Printer Model: MCU / Printerboard: `klippy.log` _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: … Hello peeps, I have an issue that where the bl touch probe hits the bed when doing Z Tilt on the second deploy and sometimes the first. Please help. I also sometimes does it for other things for the z homing but i think i have fixed that with making a longer time for the probe to move and moving Z hop taller but that only fixes for homing. Also does anyone know where i can change the speed of the Z movement sorry still new to klipper. Thanks in advance. [printer.cfg](https://klipper.discourse.group/uploads/short-url/8I6lRsPcotVzr8EP4Fn39L9EYGS.cfg) (4.5 KB) ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [February 19, 2024, 5:51am UTC](https://klipper.discourse.group/t/bl-touch-and-z-tilt/12461/2 "2024-02-19T05:51:11Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.