# BTT Eddy not working after powercycle with latest klipper version

**URL:** <https://klipper.discourse.group/t/btt-eddy-not-working-after-powercycle-with-latest-klipper-version/22601>\
**Category:** General Discussion\
**Created:** [March 22, 2025, 9:43am UTC](https://klipper.discourse.group/t/btt-eddy-not-working-after-powercycle-with-latest-klipper-version/22601 "2025-03-22T09:43:14Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![r3cliq](https://avatars.discourse-cdn.com/v4/letter/r/ac91a4/32.png) [@r3cliq](https://klipper.discourse.group/u/r3cliq)\
**Post date:** [March 23, 2025, 4:03pm UTC](https://klipper.discourse.group/t/btt-eddy-not-working-after-powercycle-with-latest-klipper-version/22601/8 "2025-03-23T16:03:39Z")

</div>

I just did some more test and compiled three versions, one for each patch and one with both patches, neither of them seems stable…  
If i turn the Eddy off for a couple of seconds (unplug USB) it won’t come back most of the times, no matter with which version.

Attached is a klippy.log with Eddy attached with the second patch.  
[klippy.log](https://klipper.discourse.group/uploads/short-url/ep4i6Z3qHGbtBVHfWFEpxJTML9u.log) (215.7 KB)

Maybe an option to choose the RP2024 speed is needed for devices having problems with 200 MHz?

---

_[View the full topic](https://klipper.discourse.group/t/btt-eddy-not-working-after-powercycle-with-latest-klipper-version/22601)._