# BTT Eddy variance with home command

**URL:** <https://klipper.discourse.group/t/btt-eddy-variance-with-home-command/21827>\
**Category:** General Discussion\
**Created:** [February 5, 2025, 1:18am UTC](https://klipper.discourse.group/t/btt-eddy-variance-with-home-command/21827 "2025-02-05T01:18:06Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 12, 2025, 6:32am UTC](https://klipper.discourse.group/t/btt-eddy-variance-with-home-command/21827/7 "2025-02-12T06:32:34Z")

</div>

I had a similar experience with the BTT Eddy:

- With a fixed z-offset, the homing value would become unstable and jump up to 0.2 mm.
- BTT mentions this behavior a bit unclearly [here](https://github.com/bigtreetech/Eddy?tab=readme-ov-file#my-z-offset-doesnt-seem-to-save-and-resets-is-there-a-work-around-or-fix).
- The “beta macros” seem to be an improvement but still not to my liking.

Finally, I reverted the BTT Eddy mod and went back to the MicroProbe on this printer.

---

_[View the full topic](https://klipper.discourse.group/t/btt-eddy-variance-with-home-command/21827)._