# Calibration paradox

**URL:** <https://klipper.discourse.group/t/calibration-paradox/18682>\
**Category:** General Discussion\
**Created:** [September 7, 2024, 1:40am UTC](https://klipper.discourse.group/t/calibration-paradox/18682 "2024-09-07T01:40:16Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [September 7, 2024, 7:51am UTC](https://klipper.discourse.group/t/calibration-paradox/18682/2 "2024-09-07T07:51:47Z")

</div>

TBH, I’m not at all a fan of this calibration stuff. The error introduced by

- Different extrusion factors / material properties
- Manual measurements
- Calibration model sizes
- Location biased effects of the entire motion system

is probably multiple magnitudes higher than what you are trying to correct. YMMV.

For some more detailed discussions on this subject, refer to: [Dimensional accuracy problem](https://klipper.discourse.group/t/dimensional-accuracy-problem/2370)

---

_[View the full topic](https://klipper.discourse.group/t/calibration-paradox/18682)._
