# Calibrations are not saving

**URL:** <https://klipper.discourse.group/t/calibrations-are-not-saving/18142>\
**Category:** General Discussion\
**Created:** [August 8, 2024, 12:22am UTC](https://klipper.discourse.group/t/calibrations-are-not-saving/18142 "2024-08-08T00:22:34Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![eonsofstupidity](https://avatars.discourse-cdn.com/v4/letter/e/96bed5/32.png) [@eonsofstupidity](https://klipper.discourse.group/u/eonsofstupidity)\
**Post date:** [August 8, 2024, 12:22am UTC](https://klipper.discourse.group/t/calibrations-are-not-saving/18142/1 "2024-08-08T00:22:34Z")

</div>

### Basic Information:

Printer Model: modified ender 3 pro  
 MCU / Printerboard: e3v2  
 Host / SBC pi4b+  
 klippy.log  
[klippy.log](https://klipper.discourse.group/uploads/short-url/9BKe54Keb1Sk7WOXnxA6za2myde.log) (5.5 MB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

…

Appears as though none of my new settings are being applied. I.E Z\_Offset after running calibrate\_probe, as well as my new rotation\_distance after doing the extrusion multiplier. attached my log.

\*EDIT - corrected the klippy.log to actually include useful information and not just configurations.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [August 8, 2024, 5:46am UTC](https://klipper.discourse.group/t/calibrations-are-not-saving/18142/2 "2024-08-08T05:46:45Z")

</div>

Hello @eonsofstupidity !

Do you perform a `SAVE_CONFIG` after doing the settings?

[https://www.klipper3d.org/G-Codes.html#configfile](https://www.klipper3d.org/G-Codes.html#configfile)

BTW: Is that the **complete** klippy.log? It’s quite short.

---

<div class="post-metadata">

**Author:** ![eonsofstupidity](https://avatars.discourse-cdn.com/v4/letter/e/96bed5/32.png) [@eonsofstupidity](https://klipper.discourse.group/u/eonsofstupidity)\
**Post date:** [August 8, 2024, 4:15pm UTC](https://klipper.discourse.group/t/calibrations-are-not-saving/18142/3 "2024-08-08T16:15:27Z")

</div>

Sorry, messed it up when I was attempting to have it focus around the probe\_calibration. Fixing it now

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [October 7, 2024, 4:15pm UTC](https://klipper.discourse.group/t/calibrations-are-not-saving/18142/4 "2024-10-07T16:15:32Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.