# Cannot Open File

**URL:** <https://klipper.discourse.group/t/cannot-open-file/8926>\
**Category:** General Discussion\
**Created:** [June 12, 2023, 2:59am UTC](https://klipper.discourse.group/t/cannot-open-file/8926 "2023-06-12T02:59:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vhubbard](https://avatars.discourse-cdn.com/v4/letter/v/7feea3/32.png) [@vhubbard](https://klipper.discourse.group/u/vhubbard)\
**Post date:** [June 12, 2023, 2:59am UTC](https://klipper.discourse.group/t/cannot-open-file/8926/1 "2023-06-12T02:59:37Z")

</div>

### Basic Information:

Printer Model: Ender 3 S1 Pro  
 MCU / Printerboard: STM32F401  
 `[klippy(7).log](https://klipper.discourse.group/uploads/short-url/2frDTZHM54nV8A5avAVXnjlOcDa.log) (619.2 KB)

Well, I thought I was up and running… I tried to send my first print and I got an error message, cannot open file. I’m thinking it’s something to do with the g-code. I used Cura and saved file as a g-code to my desktop and then imported with Mainsail. Is there a setting that I need to check somewhere?

[square\_tower.gcode](https://klipper.discourse.group/uploads/short-url/tfe601ZTchmXRINY2yoQxvJy5SC.gcode) (799.4 KB)

Thanks,  
Veronica

---

<div class="post-metadata">

**Author:** ![vhubbard](https://avatars.discourse-cdn.com/v4/letter/v/7feea3/32.png) [@vhubbard](https://klipper.discourse.group/u/vhubbard)\
**Post date:** [June 12, 2023, 4:40am UTC](https://klipper.discourse.group/t/cannot-open-file/8926/2 "2023-06-12T04:40:25Z")

</div>

Found my problem. Gcode path had to be corrected.