# Change M600 to keep printing before pausing the job **URL:** \ **Category:** General Discussion\ **Created:** [October 10, 2024, 3:10pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314 "2024-10-10T15:10:07Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Paulorfo](https://avatars.discourse-cdn.com/v4/letter/p/7ea924/32.png) [@Paulorfo](https://klipper.discourse.group/u/Paulorfo)\ **Post date:** [October 10, 2024, 3:10pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/1 "2024-10-10T15:10:07Z")
### Basic Information: Printer Model: K1c I’m trying to change the filament runout routine. The K1C is a direct driven printer and when the filament sensor is triggered and the printer pause the job, it still has approximately 50cm of filament inside the tube. I wonder if there is a way to change the M600, so after the filament sensor is triggered, the printer continues to print Xcm and only after that it will execute the filament runout routine. ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [October 10, 2024, 3:57pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/2 "2024-10-10T15:57:07Z")
Hello @Paulorfo ! We are missing some information… That information that have been asked for in the template that you almost complete deleted. ---
**Author:** ![Paulorfo](https://avatars.discourse-cdn.com/v4/letter/p/7ea924/32.png) [@Paulorfo](https://klipper.discourse.group/u/Paulorfo)\ **Post date:** [October 10, 2024, 5:53pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/3 "2024-10-10T17:53:56Z")
### Basic Information: Printer Model: K1C MCU / Printerboard: Not applicable Host / SBC: Not applicable klippy.log: Not applicable _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: Thaks, I hope it helps … ---
**Author:** ![mykepredko](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/mykepredko/32/2085_2.png) [@mykepredko](https://klipper.discourse.group/u/mykepredko)\ **Post date:** [October 10, 2024, 5:57pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/4 "2024-10-10T17:57:55Z")
Try again - Take what you’ve posted and put in the requested data where you have put “Not applicable”. ---
**Author:** ![Paulorfo](https://avatars.discourse-cdn.com/v4/letter/p/7ea924/32.png) [@Paulorfo](https://klipper.discourse.group/u/Paulorfo)\ **Post date:** [October 10, 2024, 11:10pm UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/5 "2024-10-10T23:10:42Z")
### Basic Information: Printer Model: K1C MCU / Printerboard: This information is NOT relevant at all for the question posted Host / SBC: This information is NOT relevant at all for the question posted klippy.log: This information is NOT relevant at all for the question posted _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: There. This should help to clarify. Now let’s wait for someone interested in trying to help out with a pós solution. … ---
**Author:** ![mykepredko](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/mykepredko/32/2085_2.png) [@mykepredko](https://klipper.discourse.group/u/mykepredko)\ **Post date:** [October 11, 2024, 12:43am UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/6 "2024-10-11T00:43:11Z")
Going back to your original question: > I wonder if there is a way to change the M600, so after the filament sensor is triggered, the printer continues to print Xcm and only after that it will execute the filament runout routine. Based on the information that you’ve provided, I am quite sure that the answer to your question is “yes”. ---
**Author:** ![Paulorfo](https://avatars.discourse-cdn.com/v4/letter/p/7ea924/32.png) [@Paulorfo](https://klipper.discourse.group/u/Paulorfo)\ **Post date:** [October 11, 2024, 12:55am UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/7 "2024-10-11T00:55:59Z")
Excellent! Good to know ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [December 10, 2024, 1:48am UTC](https://klipper.discourse.group/t/change-m600-to-keep-printing-before-pausing-the-job/19314/8 "2024-12-10T01:48:49Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.