# Config - Ender 5 Plus + SKR mini E3 v2.0 + BLTouch

**URL:** <https://klipper.discourse.group/t/config-ender-5-plus-skr-mini-e3-v2-0-bltouch/13807>\
**Category:** General Discussion\
**Created:** [February 4, 2024, 7:47am UTC](https://klipper.discourse.group/t/config-ender-5-plus-skr-mini-e3-v2-0-bltouch/13807 "2024-02-04T07:47:51Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thomas2](https://avatars.discourse-cdn.com/v4/letter/t/aeb1de/32.png) [@Thomas2](https://klipper.discourse.group/u/Thomas2)\
**Post date:** [February 4, 2024, 7:47am UTC](https://klipper.discourse.group/t/config-ender-5-plus-skr-mini-e3-v2-0-bltouch/13807/1 "2024-02-04T07:47:51Z")

</div>

### Basic Information:

Printer Model: Ender 5 Plus  
 MCU / Printerboard: SKR mini E3 v2.0  
 `klippy.log`  
[klippy.log](https://klipper.discourse.group/uploads/short-url/sqEJuUIqISK5JfHhNMKUBxkOsQH.log) (844.6 KB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

When attempting to home X/Z axis currently, the endstops do not appear to be triggered. Tried querying the endstops, but they always stay open:

- **“No trigger on x after full movement”** (right before it continues hitting the endstop repeatedly for several seconds)

Read through documentation and attempted to modify the printer.cfg already, but I continued to run into more issues than before. I am also using BLTouch, which is not included within the uploaded config file.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 4, 2024, 10:04am UTC](https://klipper.discourse.group/t/config-ender-5-plus-skr-mini-e3-v2-0-bltouch/13807/2 "2024-02-04T10:04:53Z")

</div>

See [No trigger on [X / Y / Z] after full movement](https://klipper.discourse.group/t/no-trigger-on-x-y-z-after-full-movement/13404)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [April 4, 2024, 10:05am UTC](https://klipper.discourse.group/t/config-ender-5-plus-skr-mini-e3-v2-0-bltouch/13807/3 "2024-04-04T10:05:33Z")

</div>

Closed on April 4, 2024, 10:05am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.