# Config file help

**URL:** https://klipper.discourse.group/t/config-file-help/10468
**Category:** General Discussion
**Created:** [September 14, 2023, 11:39am UTC](https://klipper.discourse.group/t/config-file-help/10468 "2023-09-14T11:39:08Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Trimixdiver1](https://avatars.discourse-cdn.com/v4/letter/t/9fc348/32.png) [@Trimixdiver1](https://klipper.discourse.group/u/Trimixdiver1)
#### Post date: [September 14, 2023, 11:39am UTC](https://klipper.discourse.group/t/config-file-help/10468/1 "2023-09-14T11:39:08Z")

</div>

### Basic Information:

Printer Model: v2.4 r2 350  
 MCU / Printerboard: Octopus  
 `klippy.log`n/a

I just bought a used fombot 2.4 r2 350 with CAN from the octopus CAN port to an EBB36, it also has TAP. I had to install a new image and the seller didn’t have a backup of klipper. Can someone help me out with a config that can get me started? Thanks

---

<div class="post-metadata">

### Author: ![theophile](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/theophile/32/31_2.png) [@theophile](https://klipper.discourse.group/u/theophile)
#### Post date: [September 15, 2023, 1:55pm UTC](https://klipper.discourse.group/t/config-file-help/10468/2 "2023-09-15T13:55:31Z")

</div>

> <https://github.com/sttts/voron-klipper-config/blob/master/printer.cfg>

---

<div class="post-metadata">

### Author: ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)
#### Post date: [November 14, 2023, 1:56pm UTC](https://klipper.discourse.group/t/config-file-help/10468/3 "2023-11-14T13:56:15Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.