# Corexy homing moves diff direction after first probe

**URL:** <https://klipper.discourse.group/t/corexy-homing-moves-diff-direction-after-first-probe/12363>\
**Category:** General Discussion\
**Created:** [December 17, 2023, 5:58pm UTC](https://klipper.discourse.group/t/corexy-homing-moves-diff-direction-after-first-probe/12363 "2023-12-17T17:58:00Z")\
**Posts on this page:** 1\
**Showing post:** 23

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [December 19, 2023, 8:34am UTC](https://klipper.discourse.group/t/corexy-homing-moves-diff-direction-after-first-probe/12363/23 "2023-12-19T08:34:24Z")

</div>

You are messing yourself back and forth through the settings and now it is a bug? Highly unlikely.

- Follow [Configuration checks - Klipper documentation](https://www.klipper3d.org/Config_checks.html#verify-endstops) as @jakep_82 already indicated
- Verify your endstops positions, position\_min and position\_max settings as they seem a mile off. Also see [Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1)

---

_[View the full topic](https://klipper.discourse.group/t/corexy-homing-moves-diff-direction-after-first-probe/12363)._