# Corners of cube not printing

**URL:** <https://klipper.discourse.group/t/corners-of-cube-not-printing/19815>\
**Category:** General Discussion\
**Created:** [November 2, 2024, 9:17am UTC](https://klipper.discourse.group/t/corners-of-cube-not-printing/19815 "2024-11-02T09:17:33Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![LeonieV](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@LeonieV](https://klipper.discourse.group/u/LeonieV)\
**Post date:** [November 2, 2024, 9:17am UTC](https://klipper.discourse.group/t/corners-of-cube-not-printing/19815/1 "2024-11-02T09:17:33Z")

</div>

### Basic Information:

Printer Model: Creality K1  
 MCU / Printerboard:  
 Host / SBC  
 klippy.log  
[klippy.log](https://klipper.discourse.group/uploads/short-url/hOiOPb1PjYZh09y2vPN3IZshnCv.log) (5.9 MB)

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

…  
Hello everybody.

I am 3d printing for two years and went from creality print to orca slicer. But never dared to root my printer. How ever someone convinced me to do so and told me to start using klipper. I installed it a couple of weeks ago ([https://guilouz.github.io/](https://guilouz.github.io/)) and loved all te options I now had.

I did a big bunch of prints using petg last week and everything was great. Then I got a message on my K1 that there was a update for the firmware and if I rooted the printer I needed to go back to factory settings. So I did and updated the printer after the factory reset and after that I installed Klipper (and all the other parts) again. But there is something wrong. The printer no longer prints corners. See the test cube pics. I’ve searched the internet but cannot find someone with the same problem. If I print the same cube with Creality Print it comes out perfect.

I don’t know where to find this, so if this is needed, could someone tell me how to find this information?

MCU / Printerboard:  
 Host / SBC

I just want to get back to printing flawless with Klipper. Can someone help me?

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [November 2, 2024, 9:43am UTC](https://klipper.discourse.group/t/corners-of-cube-not-printing/19815/2 "2024-11-02T09:43:57Z")

</div>

This printer uses a modified Klipper version - rooted or not rooted, does not matter. In addition, there are some license concerns.

Such printers are not supported here. Please either revert to some Creality forum or contact them directly.

---

<div class="post-metadata">

**Author:** ![LeonieV](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@LeonieV](https://klipper.discourse.group/u/LeonieV)\
**Post date:** [November 2, 2024, 12:07pm UTC](https://klipper.discourse.group/t/corners-of-cube-not-printing/19815/3 "2024-11-02T12:07:13Z")

</div>

Sorry. I did not know this. I tried to remove my post, but I’m not allowed to do so.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [January 1, 2025, 12:07pm UTC](https://klipper.discourse.group/t/corners-of-cube-not-printing/19815/4 "2025-01-01T12:07:45Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.