# Cr Touch in Klipper? **URL:** \ **Category:** General Discussion\ **Created:** [July 2, 2022, 3:54am UTC](https://klipper.discourse.group/t/cr-touch-in-klipper/3334 "2022-07-02T03:54:09Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [July 2, 2022, 5:48am UTC](https://klipper.discourse.group/t/cr-touch-in-klipper/3334/2 "2022-07-02T05:48:53Z")
Maybe this thread can help: > [@CR-Touch always triggered](https://klipper.discourse.group/t/cr-touch-always-triggered/3028): > > Hi, I have been printing using marlin for a couple of months now with no major issues. I figured I would give Klipper a try to further optimize my prints. When I got to the part of the [guide](https://www.klipper3d.org/BLTouch.html) regarding bltouch I began experiencing errors The Issue: When I type query\_probe into the terminal klipper invariably returns : // probe: TRIGGERED Raising, lowering, and resetting has no effect on this output. Additionally this error is thrown after firmware restart. $ FIRMWARE\_RESTART // Failed to ve… --- _[View the full topic](https://klipper.discourse.group/t/cr-touch-in-klipper/3334)._