# Creality K1-Max!

**URL:** <https://klipper.discourse.group/t/creality-k1-max/25001>\
**Category:** General Discussion\
**Created:** [October 12, 2025, 9:38am UTC](https://klipper.discourse.group/t/creality-k1-max/25001 "2025-10-12T09:38:45Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![enzo.stalvio](https://avatars.discourse-cdn.com/v4/letter/e/8dc957/32.png) [@enzo.stalvio](https://klipper.discourse.group/u/enzo.stalvio)\
**Post date:** [October 12, 2025, 9:38am UTC](https://klipper.discourse.group/t/creality-k1-max/25001/1 "2025-10-12T09:38:45Z")

</div>

### Basic Information:

Printer Model:  
 MCU / Printerboard:  
 Host / SBC  
 klippy.log

_Fill out above information and_ _ **in all cases attach your** _ **`klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

…Hello, I’m Enzo and I just registered! I’m asking for help because I don’t know how to use Klippe and I don’t know how to install it! I’d like to connect it to my printer: Creality K1-Max!  
Can you help me, please? Best regards, Domenico  
Enzo.stelvio

---

<div class="post-metadata">

**Author:** ![3dcoded](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/3dcoded/32/20297_2.png) [@3dcoded](https://klipper.discourse.group/u/3dcoded)\
**Post date:** [October 12, 2025, 3:05pm UTC](https://klipper.discourse.group/t/creality-k1-max/25001/2 "2025-10-12T15:05:27Z")

</div>

Hi @enzo.stalvio ,

The K1 Max already runs “Klipper” (Creality’s heavily modified version). There’s no need to install it.

> [@3D Printers with Preinstalled and Modified Klipper Versions](https://klipper.discourse.group/t/3d-printers-with-preinstalled-and-modified-klipper-versions/20467):
>
> Rationale With the growing popularity of Klipper as a firmware option for high-speed, high-quality 3D printing, some Original Equipment Manufacturers (OEMs) have started shipping 3D printers with preinstalled, modified versions of Klipper. These modifications are often made to: Support for the specific hardware configuration. Provide customized features or interfaces. Integrate OEM-specific tools and UI elements tailored to the device. While these preinstalled versions can provide a more seam…

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [December 11, 2025, 3:05pm UTC](https://klipper.discourse.group/t/creality-k1-max/25001/3 "2025-12-11T15:05:42Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.