# Creality Sonic pad initial setup

**URL:** <https://klipper.discourse.group/t/creality-sonic-pad-initial-setup/5864>\
**Category:** General Discussion\
**Created:** [January 10, 2023, 4:05pm UTC](https://klipper.discourse.group/t/creality-sonic-pad-initial-setup/5864 "2023-01-10T16:05:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jamiekay](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/jamiekay/32/7932_2.png) [@Jamiekay](https://klipper.discourse.group/u/Jamiekay)\
**Post date:** [January 10, 2023, 4:05pm UTC](https://klipper.discourse.group/t/creality-sonic-pad-initial-setup/5864/1 "2023-01-10T16:05:24Z")

</div>

### Basic Information:

Printer Model: Creality Ender 3 V2  
 MCU / Printerboard: 4.27  
 `klippy.log` attached  
[klippy.log](https://klipper.discourse.group/uploads/short-url/rQmxEFTNzAm1LFgj1yQ5H2bnEuS.log) (77.2 KB)

_Fill out above information and in all cases attach your_ `klippy.log` _file. Pasting your_ `printer.cfg` _is **not** needed_  
_When pasting code or config snippets_ **use** _the code tags_ **\</\>** _in the menu above_

### Describe your issue:

- \*  
I seemed to have miss information about the (xyz)sensor that came with the sonic pad.  
Can someone send a link descibing that install process

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [August 5, 2024, 10:22am UTC](https://klipper.discourse.group/t/creality-sonic-pad-initial-setup/5864/2 "2024-08-05T10:22:00Z")

</div>