# Creatbot motherboard ver 9.2.3 config

**URL:** <https://klipper.discourse.group/t/creatbot-motherboard-ver-9-2-3-config/526>\
**Category:** General Discussion\
**Created:** [July 7, 2021, 11:19pm UTC](https://klipper.discourse.group/t/creatbot-motherboard-ver-9-2-3-config/526 "2021-07-07T23:19:56Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 3, 2023, 4:08pm UTC](https://klipper.discourse.group/t/creatbot-motherboard-ver-9-2-3-config/526/7 "2023-02-03T16:08:59Z")

</div>

Marlin’s `Configuration.h` alone will take you nowhere. See [Trying to create a printer.cfg. Is it possible to get fan pin and stepper current info from marlin source? - #2 by Sineos](https://klipper.discourse.group/t/trying-to-create-a-printer-cfg-is-it-possible-to-get-fan-pin-and-stepper-current-info-from-marlin-source/6220/2)

---

_[View the full topic](https://klipper.discourse.group/t/creatbot-motherboard-ver-9-2-3-config/526)._