# Creating Toggles / Switches without Pin

**URL:** <https://klipper.discourse.group/t/creating-toggles-switches-without-pin/13960>\
**Category:** General Discussion\
**Created:** [February 8, 2024, 6:21pm UTC](https://klipper.discourse.group/t/creating-toggles-switches-without-pin/13960 "2024-02-08T18:21:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![yw4z](https://avatars.discourse-cdn.com/v4/letter/y/e68b1a/32.png) [@yw4z](https://klipper.discourse.group/u/yw4z)\
**Post date:** [February 8, 2024, 6:21pm UTC](https://klipper.discourse.group/t/creating-toggles-switches-without-pin/13960/1 "2024-02-08T18:21:04Z")

</div>

Hi, Using creality K1

I’m trying to create a toggle in fluidd UI for pre print gcode macro

im planing to add 3 of them for;  
• Calibration  
• Adaptive Mesh  
• Adaptive Purge  
But im out of pins 🙂

Is there a alternative method for “output\_pin” to create toggles ?

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [April 8, 2024, 6:21pm UTC](https://klipper.discourse.group/t/creating-toggles-switches-without-pin/13960/2 "2024-04-08T18:21:16Z")

</div>

Closed on April 8, 2024, 6:21pm UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.