# Did I brick my board **URL:** \ **Category:** General Discussion\ **Created:** [August 9, 2026, 11:13pm UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224 "2026-08-09T23:13:17Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Casper75](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Casper75](https://klipper.discourse.group/u/Casper75)\ **Post date:** [August 9, 2026, 11:13pm UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/1 "2026-08-09T23:13:17Z")
### Basic Information: Printer Model: MCU / Printerboard: Host / SBC klippy.log _Fill out above information and_ _ **in all cases attach your** _ **`klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: …board is BTT octopus v1.1 I can not get a klippy log printer upgraded Tronxy x5sa i notice there was an icon on my mailsail page to update so I did and now I can not get back inot my board. I have tried to reflash the firmware but it wont change to firmware.cur I can not get a klipper log ---
**Author:** ![Blackstump](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/blackstump/32/6512_2.png) [@Blackstump](https://klipper.discourse.group/u/Blackstump)\ **Post date:** [August 10, 2026, 12:02am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/2 "2026-08-10T00:02:53Z")
[Try here, a simple search would have got you here.](https://neo.bttwiki.com/en/docs/board-docs/octopus-series/octopus-firmware-f446) ---
**Author:** ![Casper75](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Casper75](https://klipper.discourse.group/u/Casper75)\ **Post date:** [August 10, 2026, 12:11am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/3 "2026-08-10T00:11:16Z")
I went through all the steps but it would not do anything when i tried make ---
**Author:** ![Blackstump](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/blackstump/32/6512_2.png) [@Blackstump](https://klipper.discourse.group/u/Blackstump)\ **Post date:** [August 10, 2026, 12:32am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/4 "2026-08-10T00:32:32Z")
Then I would suggest you did not follow the steps because Make will either compile the firmware or give you a error - you could try make clean then retry make I am sorry not sure I can be of anymore help very hard for me when flying blind do not have the energy for that. ---
**Author:** ![Casper75](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Casper75](https://klipper.discourse.group/u/Casper75)\ **Post date:** [August 10, 2026, 12:58am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/5 "2026-08-10T00:58:01Z")
I will try it again . I also installed the jumper to try and power it from the usb-c and no light come on the board ---
**Author:** ![Casper75](https://avatars.discourse-cdn.com/v4/letter/c/779978/32.png) [@Casper75](https://klipper.discourse.group/u/Casper75)\ **Post date:** [August 10, 2026, 1:21am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/6 "2026-08-10T01:21:21Z")
Ok went back through the whole thing . Hit q then Y to save then this pops up . I type make and this is what it saysb ![IMG_5053](https://global.discourse-cdn.com/free1/uploads/klipper/original/3X/6/e/6e42a967d8e9f8bc1980a077c9db70125b0a515f.jpeg) ---
**Author:** ![Blackstump](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/blackstump/32/6512_2.png) [@Blackstump](https://klipper.discourse.group/u/Blackstump)\ **Post date:** [August 10, 2026, 2:34am UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/7 "2026-08-10T02:34:01Z")
The link I sent you is one option to try if you feel comfortable with those command it makes no mention of KIAUH, I do not use that software so I am of no help with it. You can I believe use KIAUH to flash your firmware so use that and ignore the link I gave but you can not use invalid commands inside of KIAUH from the link I send , use one or the other ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://klipper.discourse.group/u/cardoc)\ **Post date:** [August 10, 2026, 5:38pm UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/8 "2026-08-10T17:38:21Z")
> [@Casper75](#): > > BTT octopus v1.1 Instructions on recovering the bootloader: > ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [October 9, 2026, 5:38pm UTC](https://klipper.discourse.group/t/did-i-brick-my-board/26224/9 "2026-10-09T17:38:44Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.