# Dual Loop PID, a accurate bed surface temperature

**URL:** <https://klipper.discourse.group/t/dual-loop-pid-a-accurate-bed-surface-temperature/6268>\
**Category:** Features\
**Created:** [January 29, 2023, 1:43am UTC](https://klipper.discourse.group/t/dual-loop-pid-a-accurate-bed-surface-temperature/6268 "2023-01-29T01:43:18Z")\
**Posts on this page:** 1\
**Showing post:** 24

<div class="post-metadata">

**Author:** ![rmda](https://avatars.discourse-cdn.com/v4/letter/r/e99b99/32.png) [@rmda](https://klipper.discourse.group/u/rmda)\
**Post date:** [May 27, 2023, 7:48pm UTC](https://klipper.discourse.group/t/dual-loop-pid-a-accurate-bed-surface-temperature/6268/24 "2023-05-27T19:48:33Z")

</div>

> **[GitHub - rodrigo2019/klipper: Klipper is a 3d-printer firmware](https://github.com/rodrigo2019/klipper)**
>
> Klipper is a 3d-printer firmware. Contribute to rodrigo2019/klipper development by creating an account on GitHub.

you can use my fork, I already implemented it

---

_[View the full topic](https://klipper.discourse.group/t/dual-loop-pid-a-accurate-bed-surface-temperature/6268)._