# Dudes over update to 0.11

**URL:** <https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150>\
**Category:** General Discussion\
**Created:** [November 29, 2022, 6:35pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150 "2022-11-29T18:35:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peurif](https://avatars.discourse-cdn.com/v4/letter/p/c57346/32.png) [@Peurif](https://klipper.discourse.group/u/Peurif)\
**Post date:** [November 29, 2022, 6:35pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150/1 "2022-11-29T18:35:19Z")

</div>

Hi,

I have some doubts about updating Klipper to version 0.11.

I have some questions. I have an Octopus Pro + EBB42 + U2C board installed…

- Do I have to update the firmware of the EBB42 board?
- I have to update the firmware of the U2C?
- For these updates, I have to do it by the procedure that I installed them… that is, compiling the firmware in rPi, and then connecting them to the PC, to flash them with STM32 programmer?

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [November 29, 2022, 6:49pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150/2 "2022-11-29T18:49:29Z")

</div>

For every update applies:

If your system runs fine → keep it.  
If you need one or more of the new features → update.  
If you want to support the creator → update.

---

<div class="post-metadata">

**Author:** ![mykepredko](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/mykepredko/32/2085_2.png) [@mykepredko](https://klipper.discourse.group/u/mykepredko)\
**Post date:** [November 29, 2022, 6:55pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150/3 "2022-11-29T18:55:14Z")

</div>

I’d add: if you want to have your issues addressed → update.

Requesting fixes on downlevel software does not have high percentages of being prioritized.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [November 29, 2022, 7:00pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150/4 "2022-11-29T19:00:12Z")

</div>

[https://www.klipper3d.org/FAQ.html#how-do-i-upgrade-to-the-latest-software](https://www.klipper3d.org/FAQ.html#how-do-i-upgrade-to-the-latest-software)

---

<div class="post-metadata">

**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\
**Post date:** [November 29, 2022, 7:26pm UTC](https://klipper.discourse.group/t/dudes-over-update-to-0-11/5150/5 "2022-11-29T19:26:10Z")

</div>

Klipper is basically a rolling release. There’s no such thing as backporting fixes. Klipper versions are just tags at a moment in time when the software is deemed stable, and new features are often held for merging after a “release”.