# Duet 3 Mini 5+ Wifi

**URL:** <https://klipper.discourse.group/t/duet-3-mini-5-wifi/217>\
**Category:** General Discussion\
**Created:** [April 30, 2021, 12:12pm UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217 "2021-04-30T12:12:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![tecno](https://avatars.discourse-cdn.com/v4/letter/t/eb9ed0/32.png) [@tecno](https://klipper.discourse.group/u/tecno)\
**Post date:** [April 30, 2021, 12:12pm UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217/1 "2021-04-30T12:12:46Z")

</div>

When can we see this board to run Klipper?

---

<div class="post-metadata">

**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\
**Post date:** [April 30, 2021, 8:49pm UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217/2 "2021-04-30T20:49:11Z")

</div>

> <https://github.com/KevinOConnor/klipper/pull/4133>
>
> \- Adds Duet3 Mini 5+ Config with support for expansion header
> \- Includes instru…ctions on how to flash MCU with stock bootloader
> 
> Signed-off-by: Luke Ashley Luke@Lukeslab.online

---

<div class="post-metadata">

**Author:** ![tecno](https://avatars.discourse-cdn.com/v4/letter/t/eb9ed0/32.png) [@tecno](https://klipper.discourse.group/u/tecno)\
**Post date:** [May 1, 2021, 5:38am UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217/3 "2021-05-01T05:38:02Z")

</div>

Hi Jake and thank you for this information. As a new user to klipper it is not so easy to find information.

Looking forward to get one board and start a new chapter in my 3D printing life.

Cheers from Sweden  
Bengt

---

<div class="post-metadata">

**Author:** ![aldiallo-3dKlip](https://avatars.discourse-cdn.com/v4/letter/a/c68b51/32.png) [@aldiallo-3dKlip](https://klipper.discourse.group/u/aldiallo-3dKlip)\
**Post date:** [May 25, 2022, 7:51pm UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217/4 "2022-05-25T19:51:16Z")

</div>

Hi all,

Quick question for those using a duet3 mini, are you using the usb cable or the gpio to connect the raspberry? also are you powering the raspberry directly or taking the power from the duet board?

Thanks

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [March 12, 2026, 6:21pm UTC](https://klipper.discourse.group/t/duet-3-mini-5-wifi/217/5 "2026-03-12T18:21:21Z")

</div>