# E3S1Pro Meshes off the bed first probe attempt

**URL:** <https://klipper.discourse.group/t/e3s1pro-meshes-off-the-bed-first-probe-attempt/20680>\
**Category:** General Discussion\
**Created:** [December 15, 2024, 4:38am UTC](https://klipper.discourse.group/t/e3s1pro-meshes-off-the-bed-first-probe-attempt/20680 "2024-12-15T04:38:27Z")\
**Posts on this page:** 1\
**Showing post:** 15

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [December 16, 2024, 2:11pm UTC](https://klipper.discourse.group/t/e3s1pro-meshes-off-the-bed-first-probe-attempt/20680/15 "2024-12-16T14:11:30Z")

</div>

Have a look here:

> [@Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1):
>
> The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a [Cartesian Coordinate System](https://en.wikipedia.org/wiki/Cartesian_coordinate_system). This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic…

---

_[View the full topic](https://klipper.discourse.group/t/e3s1pro-meshes-off-the-bed-first-probe-attempt/20680)._