# Ender 3 pro 4.2.2 Sprite Extruder SE and Bltouch(clone) **URL:** \ **Category:** General Discussion\ **Created:** [February 6, 2024, 5:55pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910 "2024-02-06T17:55:23Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![baris](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@baris](https://klipper.discourse.group/u/baris)\ **Post date:** [February 6, 2024, 5:55pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/1 "2024-02-06T17:55:23Z")
### Basic Information: Printer Model: Ender 3 Pro MCU / Printerboard: 4.2.2 `klippy.log` _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: Hello I have an Ender 3 Pro 4.2.2 Bltouch device. I installed Sprite Extruder SE. Even though I searched on the internet and all the forums, I could not get the extruder to work. It does not push the filament. If there is anyone who can help or share the config file, I would be very happy.By the way sprite extruder may be a new model, I bought it from China. … ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [February 6, 2024, 5:57pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/2 "2024-02-06T17:57:31Z")
Hello @baris ! ![grafik](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/d/dd6f665273a07db60e7c4f5e030db79e00d2f8c3.png) Please attach it to your **next post**. ---
**Author:** ![baris](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@baris](https://klipper.discourse.group/u/baris)\ **Post date:** [February 6, 2024, 6:10pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/3 "2024-02-06T18:10:01Z")
[logs-20240206-210816.zip](https://klipper.discourse.group/uploads/short-url/bZYp8vw4QvUwrNuMzZk5YZEeHsi.zip) (99.9 KB) I’m so sorry I added it now ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [February 6, 2024, 7:27pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/4 "2024-02-06T19:27:49Z")
> [@baris](#): > > It does not push the filament. How did you try this? Did you use some gcode-commands? Or from the Web GUI? ---
**Author:** ![baris](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@baris](https://klipper.discourse.group/u/baris)\ **Post date:** [February 6, 2024, 7:42pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/5 "2024-02-06T19:42:26Z")
yes I tried. I set the extruder to 200 degrees. I pressed the push filament button from the web interface. Extruder gear is shaking very slightly and does not turn ---
**Author:** ![mykepredko](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/mykepredko/32/2085_2.png) [@mykepredko](https://klipper.discourse.group/u/mykepredko)\ **Post date:** [February 6, 2024, 8:01pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/6 "2024-02-06T20:01:23Z")
Your extruder stepper is most likely wired incorrectly for the driver. In my experience, reversing the middle two pins on one end of the cable (which ever is easier to do) will fix the problem. I couldn’t find a good link to explain it but this isn’t a bad explanation of what to do if your steppers are vibrating and not turning: > **[How to Fix An Extruder Motor That's Vibrating But Not Turning](https://3dprinterly.com/how-to-fix-an-extruder-motor-thats-vibrating-but-not-turning/)** > > You’re having a problem with your extruder motor which happens to be showing signs of movement through vibrations, but its just not turning. This is an issue that many people in the 3D printing community have faced but find it hard to get a straight... ---
**Author:** ![baris](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@baris](https://klipper.discourse.group/u/baris)\ **Post date:** [February 6, 2024, 8:34pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/7 "2024-02-06T20:34:52Z")
Doesn’t it have anything to do with the config file? ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [February 6, 2024, 9:09pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/8 "2024-02-06T21:09:15Z")
No, in the config file you do not assign the output pins of the stepper driver. ---
**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\ **Post date:** [April 6, 2024, 9:09pm UTC](https://klipper.discourse.group/t/ender-3-pro-4-2-2-sprite-extruder-se-and-bltouch-clone/13910/9 "2024-04-06T21:09:39Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.