# Ender 6 w/ OctoKlipper

**URL:** <https://klipper.discourse.group/t/ender-6-w-octoklipper/12041>\
**Category:** General Discussion\
**Created:** [December 3, 2023, 6:09pm UTC](https://klipper.discourse.group/t/ender-6-w-octoklipper/12041 "2023-12-03T18:09:29Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [December 3, 2023, 7:42pm UTC](https://klipper.discourse.group/t/ender-6-w-octoklipper/12041/8 "2023-12-03T19:42:02Z")

</div>

> [@hcet14](#):
>
> That’s quite old fashion.

**Please don’t say that!**

Some people like to work with it.  
And: On OctoPrint, Klipper was developed.

> [@Klipper Architecture / Ecosystem](https://klipper.discourse.group/t/klipper-architecture-ecosystem/6313):
>
> Klipper Architecture / Ecosystem Calling Klipper a 3D printer firmware is not complete to its full extent. In fact it is a 3D printing application with an associated ecosystem. The following overview shows how the different aspects interact. Only the red boxes is Klipper in its original sense, the other boxes are independent products forming the entire ecosystem. Klipper Host The core of the Klipper environment Typically running on a Single Board Computer (SBC), …

---

_[View the full topic](https://klipper.discourse.group/t/ender-6-w-octoklipper/12041)._