# Endstop relative position/Homing issue

**URL:** <https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030>\
**Category:** General Discussion\
**Created:** [September 26, 2024, 2:26am UTC](https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030 "2024-09-26T02:26:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![megatots](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@megatots](https://klipper.discourse.group/u/megatots)\
**Post date:** [September 26, 2024, 2:26am UTC](https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030/1 "2024-09-26T02:26:13Z")

</div>

### Describe your issue:

Hello I just got a sonic pad and the homing axis is stuck moving to the same direction regardless if I change the config and I’m not sure why.

I ran STEPPER\_BUZZ STEPPER=stepper\_x/y/z and see that the x axis is moving left, y axis is moving towards me, and z axis up. My home location should be on the upper right though so the home is moving in the wrong direction on the x and y

Printer: Ender 5 pro w/ mainboard 4.2.7 & CRTouch

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [September 26, 2024, 6:09am UTC](https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030/2 "2024-09-26T06:09:10Z")

</div>

Hello @megatots !

> [@megatots](#):
>
> I just got a sonic pad

Sorry to say: We do not provide support for the Sonic Pad.

> [@Creality Sonic Pad and Alternatives](https://klipper.discourse.group/t/creality-sonic-pad-and-alternatives/6324/1):
>
> Creality Sonic Padexclamation Update Since July 11, 2023, Creality seems to have [released a firmware](https://www.creality.com/pages/download-creality-sonic-pad?spm=..page_1934481.products_display_1.1&spm_prev=..product_afecb672-1369-4c48-ba2d-f0cd762126a6.header_1.1) with a newer Klipper version. Again, they have not released the sources for this and the other components as required by the GPL license. Again, they are violating the OSS license and making money off the work of others. Background The Creality Sonic Pad is intended to be a “one-stop” solution for Klipper. A SBC running Klipper along with Moonraker, Fluidd, Mainsail and KlipperScreen A …

Please consult Creality support

---

<div class="post-metadata">

**Author:** ![megatots](https://avatars.discourse-cdn.com/v4/letter/m/e480ec/32.png) [@megatots](https://klipper.discourse.group/u/megatots)\
**Post date:** [September 27, 2024, 4:57am UTC](https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030/3 "2024-09-27T04:57:06Z")

</div>

No worries. I was able to figure out the issue,  
for anyone else reading, modifying the cfg that was flashed into the sd card didn’t work for adjusting the endstop position. I had to connect to the web interface and change the cfg that way to get it to work correctly

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [October 27, 2024, 2:57pm UTC](https://klipper.discourse.group/t/endstop-relative-position-homing-issue/19030/4 "2024-10-27T14:57:51Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.