# Error with start print macro

**URL:** <https://klipper.discourse.group/t/error-with-start-print-macro/8750>\
**Category:** General Discussion\
**Created:** [June 3, 2023, 12:14am UTC](https://klipper.discourse.group/t/error-with-start-print-macro/8750 "2023-06-03T00:14:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Warden1of4](https://avatars.discourse-cdn.com/v4/letter/w/b3f665/32.png) [@Warden1of4](https://klipper.discourse.group/u/Warden1of4)\
**Post date:** [June 3, 2023, 12:14am UTC](https://klipper.discourse.group/t/error-with-start-print-macro/8750/1 "2023-06-03T00:14:21Z")

</div>

### Basic Information:

Printer Model: Ender 3 V2  
 MCU / Printerboard: BIGTREETECH SKR Mini E3 V3.0  
 [klippy.log](https://klipper.discourse.group/uploads/short-url/4myqPcSYxv3YHvFCqZLPlPHCLbv.log) (589.5 KB)

I had a friend help me set up the macros and klipper, I’m still learning my way through everything. But I am stuck on this, when ever I press Start Print in my macros, I always get this error, “Error evaluating ‘gcode\_macro START\_PRINT:gcode’: jinja2.exceptions.UndefinedError: ‘dict object’ has no attribute ‘position\_min’”  
Any and all help would be greatly appreciated!

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [June 3, 2023, 5:33am UTC](https://klipper.discourse.group/t/error-with-start-print-macro/8750/2 "2023-06-03T05:33:04Z")

</div>

Hello @Warden1of4 !

In this section:

```auto
[stepper_x]
step_pin = PB13
dir_pin = !PB12
enable_pin = !PB14
microsteps = 16
rotation_distance = 40
endstop_pin = ^PC0
position_endstop = 0
position_max = 245
homing_speed = 50

```

`position_min` is missing

---

<div class="post-metadata">

**Author:** ![Warden1of4](https://avatars.discourse-cdn.com/v4/letter/w/b3f665/32.png) [@Warden1of4](https://klipper.discourse.group/u/Warden1of4)\
**Post date:** [June 3, 2023, 3:32pm UTC](https://klipper.discourse.group/t/error-with-start-print-macro/8750/3 "2023-06-03T15:32:18Z")

</div>

I cant believe I am that blind, thanks for pointing that out!

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [September 4, 2024, 6:26am UTC](https://klipper.discourse.group/t/error-with-start-print-macro/8750/4 "2024-09-04T06:26:47Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.