# Feature Request - Automatic Probe Enable/Disable

**URL:** <https://klipper.discourse.group/t/feature-request-automatic-probe-enable-disable/22962>\
**Category:** Features\
**Created:** [April 12, 2025, 3:10am UTC](https://klipper.discourse.group/t/feature-request-automatic-probe-enable-disable/22962 "2025-04-12T03:10:52Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![3dcoded](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/3dcoded/32/20297_2.png) [@3dcoded](https://klipper.discourse.group/u/3dcoded)\
**Post date:** [April 14, 2025, 3:50pm UTC](https://klipper.discourse.group/t/feature-request-automatic-probe-enable-disable/22962/17 "2025-04-14T15:50:26Z")

</div>

This reminds me of:

> [@Heater not heating at expected rate](https://klipper.discourse.group/t/heater-not-heating-at-expected-rate/21738/13):
>
> Marlin:  
> “See, I have put a nice red light up. You may safely ignore it; it only has decorative purposes, and I won’t bother you with any pesky actions.”
> 
> Klipper:  
> “Here you have an ugly error message, and I’m not going to move a millimeter unless you fix this crap.”

Klipper is designed to make you fix your hardware issues before you print. If you don’t fix hardware issues, things could fail catastrophically later on.

---

_[View the full topic](https://klipper.discourse.group/t/feature-request-automatic-probe-enable-disable/22962)._