# Feature Request: Multiple Probes

**URL:** <https://klipper.discourse.group/t/feature-request-multiple-probes/23284>\
**Category:** Features\
**Created:** [May 4, 2025, 4:01pm UTC](https://klipper.discourse.group/t/feature-request-multiple-probes/23284 "2025-05-04T16:01:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![EmperorArthur](https://avatars.discourse-cdn.com/v4/letter/e/9fc29f/32.png) [@EmperorArthur](https://klipper.discourse.group/u/EmperorArthur)\
**Post date:** [May 4, 2025, 4:01pm UTC](https://klipper.discourse.group/t/feature-request-multiple-probes/23284/1 "2025-05-04T16:01:14Z")

</div>

I would like to be able to use a BTT Eddy probe on my Magneto X printer at the same time as the built in probe. However, Klipper does not currently support this.

I’ve made some progress and have both probes online at the same time, but am trying to figure out how to make the mesh code use one and the homing code use the other.

> **[GitHub - EmperorArthur/klipper at magx/multi-probe2](https://github.com/EmperorArthur/klipper/tree/magx/multi-probe2)**
>
> magx/multi-probe2

In theory, this would also allow for automatically determining the BTT Eddy’s Z-height automatically, but just being able to use both would be enough.

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [May 4, 2025, 5:47pm UTC](https://klipper.discourse.group/t/feature-request-multiple-probes/23284/2 "2025-05-04T17:47:40Z")

</div>

See [Thoughts on homing support in Klipper](https://klipper.discourse.group/t/thoughts-on-homing-support-in-klipper/22737)  
ETA TBD

---

<div class="post-metadata">

**Author:** ![EmperorArthur](https://avatars.discourse-cdn.com/v4/letter/e/9fc29f/32.png) [@EmperorArthur](https://klipper.discourse.group/u/EmperorArthur)\
**Post date:** [May 4, 2025, 8:44pm UTC](https://klipper.discourse.group/t/feature-request-multiple-probes/23284/3 "2025-05-04T20:44:07Z")

</div>

Hmm, I need to re-read that whole thread more closely.

Makes sense it would be related, but the initial post didn’t seem like it was quite the same thing as this one.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [June 4, 2025, 6:44am UTC](https://klipper.discourse.group/t/feature-request-multiple-probes/23284/4 "2025-06-04T06:44:25Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.