# First time using the extruder

**URL:** <https://klipper.discourse.group/t/first-time-using-the-extruder/8517>\
**Category:** General Discussion\
**Created:** [May 20, 2023, 9:55pm UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517 "2023-05-20T21:55:32Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![EvanGel](https://avatars.discourse-cdn.com/v4/letter/e/47e85d/32.png) [@EvanGel](https://klipper.discourse.group/u/EvanGel)\
**Post date:** [May 20, 2023, 9:55pm UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/1 "2023-05-20T21:55:32Z")

</div>

### Basic Information:

Printer Model: tronxy x5sa  
 MCU / Printerboard:manta m8p  
 [klippy (7).log](https://klipper.discourse.group/uploads/short-url/b36ZRRY6WoyAfqyVx6LygzXGFwx.log) (3.0 MB)

very new to this, first time trying to run the extruder. I got the shutdown  
…“TMC ‘extruder’ reports error: DRV\_STATUS: 40190020 s2vsb=1(ShortToSupply\_B!) cs\_actual=25 stealth=1”

---

<div class="post-metadata">

**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\
**Post date:** [May 20, 2023, 10:48pm UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/2 "2023-05-20T22:48:05Z")

</div>

[https://www.klipper3d.org/TMC\_Drivers.html#tmc-reports-error-shorttognd-or-shorttosupply](https://www.klipper3d.org/TMC_Drivers.html#tmc-reports-error-shorttognd-or-shorttosupply)

---

<div class="post-metadata">

**Author:** ![EvanGel](https://avatars.discourse-cdn.com/v4/letter/e/47e85d/32.png) [@EvanGel](https://klipper.discourse.group/u/EvanGel)\
**Post date:** [May 21, 2023, 3:09am UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/3 "2023-05-21T03:09:16Z")

</div>

I deleted stelth chop threshold and got

TMC ‘extruder’ reports error: DRV\_STATUS: 001900d0 s2vsa=1(ShortToSupply\_A!) ola=1(OpenLoad\_A!) olb=1(OpenLoad\_B!) cs\_actual=25

---

<div class="post-metadata">

**Author:** ![jakep\_82](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jakep\_82](https://klipper.discourse.group/u/jakep_82)\
**Post date:** [May 21, 2023, 3:58am UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/4 "2023-05-21T03:58:12Z")

</div>

Then you likely have a wiring issue.

---

<div class="post-metadata">

**Author:** ![EvanGel](https://avatars.discourse-cdn.com/v4/letter/e/47e85d/32.png) [@EvanGel](https://klipper.discourse.group/u/EvanGel)\
**Post date:** [May 21, 2023, 5:31am UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/5 "2023-05-21T05:31:44Z")

</div>

ok I moved the stepper to another port and reset the pins now I get

“Unable to read tmc uart ‘extruder’ register IFCNT”

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [June 16, 2024, 8:00pm UTC](https://klipper.discourse.group/t/first-time-using-the-extruder/8517/6 "2024-06-16T20:00:10Z")

</div>