# Fysetc Mini display does not show anything anymore?

**URL:** <https://klipper.discourse.group/t/fysetc-mini-display-does-not-show-anything-anymore/21676>\
**Category:** General Discussion\
**Created:** [January 28, 2025, 2:45pm UTC](https://klipper.discourse.group/t/fysetc-mini-display-does-not-show-anything-anymore/21676 "2025-01-28T14:45:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![4711Austria](https://avatars.discourse-cdn.com/v4/letter/4/c6cbf5/32.png) [@4711Austria](https://klipper.discourse.group/u/4711Austria)\
**Post date:** [January 28, 2025, 2:45pm UTC](https://klipper.discourse.group/t/fysetc-mini-display-does-not-show-anything-anymore/21676/1 "2025-01-28T14:45:40Z")

</div>

### Basic Information:

Printer Model: Tronxy 500  
 MCU / Printerboard: Spider V2.2

Hi, did work before, depluggled for a long time, now not anymore?  
Thx

```auto
########################################
# Fysetc Display Mini 12864 Panel (RGB)
########################################
[display]
#	mini12864 LCD Display
lcd_type: uc1701
cs_pin: PC11
a0_pin: PD2
rst_pin: PC10
encoder_pins: ^PC6,^PC7
click_pin: ^!PA8
contrast: 63
#spi_bus: spi1
spi_software_mosi_pin: PA7
spi_software_miso_pin: PA6
spi_software_sclk_pin: PA5

[neopixel fysetc_mini12864]
#	To control Neopixel RGB in mini12864 display
pin: PC12
chain_count: 3
initial_RED: 0.0
initial_GREEN: 0.0
initial_BLUE: 0.5
color_order: RGB

```

[printer.cfg](https://klipper.discourse.group/uploads/short-url/qbjlsvnmLbZy1q9LksAeuojLyjf.cfg) (14.6 KB)  
[klippy.log](https://klipper.discourse.group/uploads/short-url/bvs1WUH9x5Opdu7Ba4Vz0mRDz5b.log) (60.0 KB)  
[moonraker.log](https://klipper.discourse.group/uploads/short-url/tNyWN1s7yxGdbqtdQKapxlXsuuS.log) (62.9 KB)

 ![IMG_0905](https://global.discourse-cdn.com/free1/uploads/klipper/original/3X/1/a/1a684cf761cfce5f5a8ea1a57825d0744332f36a.jpeg)  
 ![IMG_0904](https://global.discourse-cdn.com/free1/uploads/klipper/original/3X/6/f/6f19e5c6ffb7e17cef30eccceb268f3ef17d7989.jpeg)

---

<div class="post-metadata">

**Author:** ![4711Austria](https://avatars.discourse-cdn.com/v4/letter/4/c6cbf5/32.png) [@4711Austria](https://klipper.discourse.group/u/4711Austria)\
**Post date:** [January 29, 2025, 6:16am UTC](https://klipper.discourse.group/t/fysetc-mini-display-does-not-show-anything-anymore/21676/2 "2025-01-29T06:16:16Z")

</div>

> [@4711Austria](#):
>
> `fysetc_mini12864`

just wrong way plugged in. solved.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [February 28, 2025, 4:16pm UTC](https://klipper.discourse.group/t/fysetc-mini-display-does-not-show-anything-anymore/21676/3 "2025-02-28T16:16:22Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.