# GEEETech i3 klipper firmware **URL:** \ **Category:** Configs\ **Created:** [January 2, 2025, 10:40am UTC](https://klipper.discourse.group/t/geeetech-i3-klipper-firmware/21075 "2025-01-02T10:40:29Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![balu999](https://avatars.discourse-cdn.com/v4/letter/b/2bfe46/32.png) [@balu999](https://klipper.discourse.group/u/balu999)\ **Post date:** [January 2, 2025, 10:40am UTC](https://klipper.discourse.group/t/geeetech-i3-klipper-firmware/21075/1 "2025-01-02T10:40:29Z")
Hello I installed the klipper firmware on a GEEETech i3 printer. Then I made a mainsailOS on an sd card with an imager. Mainsail sees the printer, but when I warm up the extruder or the bed, mainsail and the firmware restart. It worked with Merlin firmware and octoprint. ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [January 2, 2025, 11:32am UTC](https://klipper.discourse.group/t/geeetech-i3-klipper-firmware/21075/2 "2025-01-02T11:32:24Z")
Hello @balu999 ! Obviously you did not read this before deleting: > [DELETE\_ME\_AFTER\_READING] > This category is for posting **working configs only**. It is **not** intended for support or questions. > [/DELETE\_ME\_AFTER\_READING] Please try again in **General Discussion**. Do not delete the template. Provide all information that is asked for. Do not Copy&Paste. Please upload files here ![Upload](https://global.discourse-cdn.com/free1/uploads/klipper/original/3X/1/8/1829a277b2fe6dff4eba8933c496efc4686ffc0c.png) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [January 2, 2025, 11:32am UTC](https://klipper.discourse.group/t/geeetech-i3-klipper-firmware/21075/3 "2025-01-02T11:32:27Z")