# Geeetech i3 klipper

**URL:** <https://klipper.discourse.group/t/geeetech-i3-klipper/21080>\
**Category:** General Discussion\
**Created:** [January 2, 2025, 1:15pm UTC](https://klipper.discourse.group/t/geeetech-i3-klipper/21080 "2025-01-02T13:15:57Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\
**Post date:** [January 2, 2025, 2:11pm UTC](https://klipper.discourse.group/t/geeetech-i3-klipper/21080/2 "2025-01-02T14:11:34Z")

</div>

Yes, bed and extruder don’t heat up. I don’t know, if this helps… [Klipper configuration for Geeetech Pursa I3 incl. GT 2560 Bourd Rev. 1.0 - #5 by ajoreis](https://klipper.discourse.group/t/klipper-configuration-for-geeetech-pursa-i3-incl-gt-2560-bourd-rev-1-0/12065/5)

Good luck, hcet14

---

_[View the full topic](https://klipper.discourse.group/t/geeetech-i3-klipper/21080)._