# Genereting new points bed meshing

**URL:** <https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752>\
**Category:** General Discussion\
**Created:** [February 1, 2025, 1:25pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752 "2025-02-01T13:25:33Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Marioskiv](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@Marioskiv](https://klipper.discourse.group/u/Marioskiv)\
**Post date:** [February 1, 2025, 1:25pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/1 "2025-02-01T13:25:33Z")

</div>

### Basic Information:

Printer Model: kobra plus  
 MCU / Printerboard:  
 Host / SBC  
 klippy.log

_Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_  
_ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _

### Describe your issue:

an anybody help me whith bed meshing complete start automaticaly meshing again hard and fast and say generating new ponts.  
[klippy(5).log](https://klipper.discourse.group/uploads/short-url/4bUL0CIxCOSiIDW3DPXJHLX898t.log) (1.9 MB)

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 1, 2025, 3:48pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/2 "2025-02-01T15:48:08Z")

</div>

I have absolutely no idea what you are asking for. Please use a translation app like [deepl.com](http://deepl.com) if English is a problem.

---

<div class="post-metadata">

**Author:** ![Marioskiv](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@Marioskiv](https://klipper.discourse.group/u/Marioskiv)\
**Post date:** [February 1, 2025, 4:21pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/3 "2025-02-01T16:21:48Z")

</div>

sorry I’m not good at English. So when it finishes with the bed mesh calibration it immediately starts automatically and does the bed mesh calibration but fast and hard and I hit the bed. The clipper says: generating new points

---

<div class="post-metadata">

**Author:** ![Marioskiv](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@Marioskiv](https://klipper.discourse.group/u/Marioskiv)\
**Post date:** [February 2, 2025, 9:51am UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/4 "2025-02-02T09:51:25Z")

</div>

[klippy(5).log](https://klipper.discourse.group/uploads/short-url/4bUL0CIxCOSiIDW3DPXJHLX898t.log) (1.9 MB)

---

<div class="post-metadata">

**Author:** ![Marioskiv](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@Marioskiv](https://klipper.discourse.group/u/Marioskiv)\
**Post date:** [February 6, 2025, 9:11pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/5 "2025-02-06T21:11:04Z")

</div>

Can someone help me?

---

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [February 7, 2025, 10:07am UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/6 "2025-02-07T10:07:39Z")

</div>

Sorry, I had a look at your log and I cannot see any evident problems. From your description, I still have not been able to understand the issue.

---

<div class="post-metadata">

**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\
**Post date:** [February 7, 2025, 11:53am UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/7 "2025-02-07T11:53:45Z")

</div>

> [@Marioskiv](#):
>
> So when it finishes with the bed mesh calibration it immediately starts automatically

```auto
[gcode_macro mesh_leveling]
gcode = 
	M190 S70
	M109 S220
	G28
	BED_MESH_CALIBRATE PROFILE=mesh2 METHOD=automatic
	BED_MESH_CALIBRATE PROFILE=mesh2 METHOD=automatic MESH_MIN=30,30 MESH_MAX=270,270 PROBE_COUNT=5,5 PROBE_SPEED=130
	BED_MESH_PROFILE SAVE=mesh2
	SAVE_CONFIG

```

Why do you call the `BED_MESH_CALIBRATE` a second time in that macro with different parameters?

---

<div class="post-metadata">

**Author:** ![Marioskiv](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@Marioskiv](https://klipper.discourse.group/u/Marioskiv)\
**Post date:** [February 13, 2025, 6:06pm UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/8 "2025-02-13T18:06:31Z")

</div>

Thank you very much!! that was the problem!

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)\
**Post date:** [March 16, 2025, 4:06am UTC](https://klipper.discourse.group/t/genereting-new-points-bed-meshing/21752/9 "2025-03-16T04:06:59Z")

</div>

Closed on March 16, 2025, 4:06am UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.