# Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo **URL:** \ **Category:** General Discussion\ **Created:** [October 31, 2023, 8:47am UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278 "2023-10-31T08:47:21Z")\ **Posts on this page:** 1\ **Showing post:** 123
**Author:** ![LifeOfBrian](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/lifeofbrian/32/2380_2.png) [@LifeOfBrian](https://klipper.discourse.group/u/LifeOfBrian)\ **Post date:** [January 3, 2024, 6:30pm UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278/123 "2024-01-03T18:30:55Z")
> [@Betzebub](#): > > `Move exceeds maximum extrusion` Have a look here: > [@Move exceeds maximum extrusion (AA mm^2 vs BB mm^2)](https://klipper.discourse.group/t/move-exceeds-maximum-extrusion-aa-mm-2-vs-bb-mm-2/6636): > > Move exceeds maximum extrusion (AA mm^2 vs BB mm^2) Background Klipper has a safety mechanism that checks if a single move extrudes an unhealthy amount of filament or if the extrusion of multiple moves add up to such an amount. This limit is calculated according to following formula: Maximum Extrusion = 4.0 x Nozzle\_Diameter^2 = 4.0 x 0.4^2 = 0.640 mm² For the standard 0.4 mm nozzle the default values calculates to: Maximum Extrusion = 4.0 x 0.4^2 = 0.640 mm² Reasons Misplaced M83 (Rela… You might want to use absolute extrusion (M82) instead of relative extrusion (M83). --- _[View the full topic](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278)._