# Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

**URL:** <https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278>\
**Category:** General Discussion\
**Created:** [October 31, 2023, 8:47am UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278 "2023-10-31T08:47:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [October 31, 2023, 10:48am UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278/2 "2023-10-31T10:48:12Z")

</div>

See [CR6SE printer firmware installation has consistently failed - #2 by Sineos](https://klipper.discourse.group/t/cr6se-printer-firmware-installation-has-consistently-failed/11188/2)

---

_[View the full topic](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278)._