# Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

**URL:** <https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278>\
**Category:** General Discussion\
**Created:** [October 31, 2023, 8:47am UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278 "2023-10-31T08:47:21Z")\
**Posts on this page:** 1\
**Showing post:** 89

<div class="post-metadata">

**Author:** ![kvgx12](https://avatars.discourse-cdn.com/v4/letter/k/a587f6/32.png) [@kvgx12](https://klipper.discourse.group/u/kvgx12)\
**Post date:** [December 31, 2023, 8:01pm UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278/89 "2023-12-31T20:01:23Z")

</div>

set this in .config  
CONFIG\_FLASH\_APPLICATION\_ADDRESS=0x8009000  
But this won’t help currently, as it can’t be flashed for some reason

I dumped whole flash through debug interface and indeed the bootloader is 36KiB

Here is the dumped flash with original firmware installed  
[flash.bin.zip](https://klipper.discourse.group/uploads/short-url/hMnGxqqcdXlvjdwqw6MVduMl0se.zip) (178.9 KB)

---

_[View the full topic](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278)._