# Getting orange pi 3 lts + klipper working with anycubic kobra 2 neo

**URL:** <https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278>\
**Category:** General Discussion\
**Created:** [October 31, 2023, 8:47am UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278 "2023-10-31T08:47:21Z")\
**Posts on this page:** 1\
**Showing post:** 90

<div class="post-metadata">

**Author:** ![HWTaro9](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/hwtaro9/32/9050_2.png) [@HWTaro9](https://klipper.discourse.group/u/HWTaro9)\
**Post date:** [December 31, 2023, 11:45pm UTC](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278/90 "2023-12-31T23:45:56Z")

</div>

I have a K2 Neo and just disassembled it to get to the motherboard, and the CH430 is definitely connected to PA2 RX, PA3 TX. And there is a 8Mhz and 12Mhz external clock source.

---

_[View the full topic](https://klipper.discourse.group/t/getting-orange-pi-3-lts-klipper-working-with-anycubic-kobra-2-neo/11278)._