# Heater Bed Temperature is increasing without heating **URL:** \ **Category:** General Discussion\ **Created:** [October 9, 2023, 3:30pm UTC](https://klipper.discourse.group/t/heater-bed-temperature-is-increasing-without-heating/10894 "2023-10-09T15:30:40Z")\ **Posts on this page:** 1\ **Showing post:** 20
**Author:** ![hcet14](https://avatars.discourse-cdn.com/v4/letter/h/ecd19e/32.png) [@hcet14](https://klipper.discourse.group/u/hcet14)\ **Post date:** [October 15, 2023, 3:57pm UTC](https://klipper.discourse.group/t/heater-bed-temperature-is-increasing-without-heating/10894/20 "2023-10-15T15:57:25Z")
> [@EddyMI3D](#): > > You may have a look here: Sorry Eddy, I didn’t asked properly. My question was meant, how is runaway protection implemented in the Klipper code? I’m a safety nazi, better save than sorry! Means, avoid fire risk in the first place and electrical risk second (that’ll probably hurt just me)! Living in an apartment house, I try very hard to make sure not to start a fire! Hurting anyone with my hobby would also be fatal for me. I guess, I couldn’t continue to live. Before starting FDM printing, I build this, use it and check it every 3 month. ![extinguisher_small](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/a/a77790bd9eb093cee850acb5a4b4803ccaaa6542.jpeg) Your link didn’t help answering my question. > [@EddyMI3D](#): > > [https://all3dp.com/2/thermal-runaway-3d-printer-marlin-thermal-runaway-protection/](https://all3dp.com/2/thermal-runaway-3d-printer-marlin-thermal-runaway-protection/) Again, my question was about how the runaway protection of Klipper works. I guess this is a starting point to understand that. [Configuration reference - Klipper documentation](https://www.klipper3d.org/Config_Reference.html) Search [verify\_heater]. And of course the min\_temp and max\_temp settings. --- _[View the full topic](https://klipper.discourse.group/t/heater-bed-temperature-is-increasing-without-heating/10894)._