# Heater\_generic not supported

**URL:** <https://klipper.discourse.group/t/heater-generic-not-supported/9070>\
**Category:** General Discussion\
**Created:** [June 21, 2023, 3:52am UTC](https://klipper.discourse.group/t/heater-generic-not-supported/9070 "2023-06-21T03:52:53Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![koconnor](https://avatars.discourse-cdn.com/v4/letter/k/aca169/32.png) [@koconnor](https://klipper.discourse.group/u/koconnor)\
**Post date:** [June 22, 2023, 3:54am UTC](https://klipper.discourse.group/t/heater-generic-not-supported/9070/20 "2023-06-22T03:54:06Z")

</div>

Well, you’ve defined a `[gcode_macro SET_HEATER_TEMPERATURE]` section that overrides the internal `SET_HEATER_TEMPERATURE` and explicitly checks for just “extruder” and “heater\_bed”…

I’m guessing you grabbed some macros from somewhere. You’ll need to review them and perhaps choose some alternative.

-Kevin

---

_[View the full topic](https://klipper.discourse.group/t/heater-generic-not-supported/9070)._