# Help: Move out of range

**URL:** https://klipper.discourse.group/t/help-move-out-of-range/20959
**Category:** General Discussion
**Created:** [December 28, 2024, 12:27am UTC](https://klipper.discourse.group/t/help-move-out-of-range/20959 "2024-12-28T00:27:52Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![zippokid](https://avatars.discourse-cdn.com/v4/letter/z/5f9b8f/32.png) [@zippokid](https://klipper.discourse.group/u/zippokid)
#### Post date: [December 28, 2024, 12:27am UTC](https://klipper.discourse.group/t/help-move-out-of-range/20959/1 "2024-12-28T00:27:52Z")

</div>

Printer Model: Ender 3 v2  
MCU / Printerboard: V4.2.7 Silent Board  
Host / SBC: mainsail?  
 klippy.log: Please see attached

I’m working with a Frinkin Ender 3 V2, and when I search for solutions to my issue, I often come across a video from PrintsLeo3D. I thought I had correctly set up my minimum and maximum mesh values. The printer probes the bed fine, but sometimes when I start a print, I encounter an error saying “Move out of range.” It seems like this issue has been resolved by others, but I haven’t been able to fix it. Any help would be greatly appreciated!

[klippy.log](https://klipper.discourse.group/uploads/short-url/1zY6UHpq7PKKxtiAX0w83o7XrVj.log) (354.0 KB)

[printer cfg.txt](https://klipper.discourse.group/uploads/short-url/nLHz87PXmnmObwEIGacwlY9QYE6.txt) (13.0 KB)

---

<div class="post-metadata">

### Author: ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)
#### Post date: [December 28, 2024, 8:02am UTC](https://klipper.discourse.group/t/help-move-out-of-range/20959/2 "2024-12-28T08:02:02Z")

</div>

![grafik](https://global.discourse-cdn.com/free1/uploads/klipper/original/3X/0/d/0dfa7612d135078f8e363ee449525f7ddb1f327c.png)

Your maximum Y value is set to 210.

---

<div class="post-metadata">

### Author: ![zippokid](https://avatars.discourse-cdn.com/v4/letter/z/5f9b8f/32.png) [@zippokid](https://klipper.discourse.group/u/zippokid)
#### Post date: [December 28, 2024, 1:13pm UTC](https://klipper.discourse.group/t/help-move-out-of-range/20959/3 "2024-12-28T13:13:27Z")

</div>

This looks to have solved it, thank you so much!

---

<div class="post-metadata">

### Author: ![system](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/64419bf2aac6639e6ef5cef200dcd456b0a01ac3.png) [@system](https://klipper.discourse.group/u/system)
#### Post date: [January 27, 2025, 11:13pm UTC](https://klipper.discourse.group/t/help-move-out-of-range/20959/4 "2025-01-27T23:13:38Z")

</div>

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.