# Home offset for small PEI

**URL:** <https://klipper.discourse.group/t/home-offset-for-small-pei/195>\
**Category:** General Discussion\
**Created:** [April 24, 2021, 1:17am UTC](https://klipper.discourse.group/t/home-offset-for-small-pei/195 "2021-04-24T01:17:27Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\
**Post date:** [April 25, 2021, 9:04am UTC](https://klipper.discourse.group/t/home-offset-for-small-pei/195/4 "2021-04-25T09:04:46Z")

</div>

See this graphic (by courtesy of Voron)

 ![grafik](https://global.discourse-cdn.com/free1/uploads/klipper/original/1X/52785416239d50ff934d464f7062bb27b6f6ca6a.png)

You would set:

```
position_endstop: 255
position_max: 255

```

This allows your printer to reach your desired X=0 and Y=0.  
In your slicer’s configuration you would set a bedsize of only 250 x 250 making sure that your print actually ends up on the bed.

In your case X=0 and Y=0 is the start of your PEI and the size of your PEI is the bedsize for the slicer.

---

_[View the full topic](https://klipper.discourse.group/t/home-offset-for-small-pei/195)._