# Honestly im about to give up on klipper, its just getting ridiculous at this point **URL:** \ **Category:** General Discussion\ **Created:** [February 9, 2024, 7:54pm UTC](https://klipper.discourse.group/t/honestly-im-about-to-give-up-on-klipper-its-just-getting-ridiculous-at-this-point/13994 "2024-02-09T19:54:36Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [February 9, 2024, 8:15pm UTC](https://klipper.discourse.group/t/honestly-im-about-to-give-up-on-klipper-its-just-getting-ridiculous-at-this-point/13994/2 "2024-02-09T20:15:48Z")
This is one issue: ![grafik](https://global.discourse-cdn.com/free1/uploads/klipper/original/2X/c/cbb3d295a452b07edc9ee3ec67c7766c009d99d4.png) A cartesian printer has it origin on the front left. Never in the centre. Only Delta printers have the origin in the centre. > [@Understanding X and Y Axes Limits and Homing](https://klipper.discourse.group/t/understanding-x-and-y-axes-limits-and-homing/10779/1): > > The X and Y Axis Klipper needs to know from its printer.cfg settings how far the X and Y axes can safely move without hitting the printer’s frame. It also needs to know where the origin (X=0 / Y=0) is. This origin is the beginning of the usable printer bed. In the following, we assume a Cartesian printer that follows the conventions of a [Cartesian Coordinate System](https://en.wikipedia.org/wiki/Cartesian_coordinate_system). This is also the reason why it is a quasi-standard to define the origin as the left-front corner of the bed. This way, all logic… --- _[View the full topic](https://klipper.discourse.group/t/honestly-im-about-to-give-up-on-klipper-its-just-getting-ridiculous-at-this-point/13994)._