# How do I request a config file for the CR-M4? (stock and Octopus Max EZ) **URL:** \ **Category:** General Discussion\ **Created:** [April 28, 2024, 3:33pm UTC](https://klipper.discourse.group/t/how-do-i-request-a-config-file-for-the-cr-m4-stock-and-octopus-max-ez/16106 "2024-04-28T15:33:32Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Octupole](https://avatars.discourse-cdn.com/v4/letter/o/e47774/32.png) [@Octupole](https://klipper.discourse.group/u/Octupole)\ **Post date:** [April 28, 2024, 3:33pm UTC](https://klipper.discourse.group/t/how-do-i-request-a-config-file-for-the-cr-m4-stock-and-octopus-max-ez/16106/1 "2024-04-28T15:33:32Z")
### Basic Information: Printer Model: CR-M4 MCU / Printerboard: Only one version specific to the CR-M4 Atmega AVR atmega 2560 Host / SBC Sonic Pad (suspect subpar usb ports I’m having random disconnects) Also using a pc to run klipper which is why I’m requesting a config file. I recently used KIAUH on an unused pc but there is not a file in klipper/config that I can find to move forward with “make” I have some config info from config file created by the sonic pad and accessed via web interface (orca slicer) Suspect that file is Sonic pad specific. [klippy (2).log](https://klipper.discourse.group/uploads/short-url/lzgZvKIu915W8t6quT1y72cBGuy.log) (3.7 KB) klippy.log I would like to eventually replace the stock control board (ordered a Octopus Max EZ) and move to using larger nozzle sizes. It has a very large build volume. But I’m still new to this and feel like I should learn to walk before I run. Although I would really like to get away from a Crealtiy version of Klipper and the use the real thing. And spending hours over what might be a poor usb port is … The goal is printing large and reliably. Thanks for any help. _Fill out above information and_ **_in all cases attach your_ `klippy.log` _file_** (use zip to compress it, if too big). _Pasting your_ `printer.cfg` _is **not** needed_ _ **Be sure to check our “Knowledge Base” Category first. Most relevant items, e.g. error messages, are covered there** _ ### Describe your issue: … ---
**Author:** ![klpprusr](https://avatars.discourse-cdn.com/v4/letter/k/c5a1d2/32.png) [@klpprusr](https://klipper.discourse.group/u/klpprusr)\ **Post date:** [June 6, 2024, 11:49pm UTC](https://klipper.discourse.group/t/how-do-i-request-a-config-file-for-the-cr-m4-stock-and-octopus-max-ez/16106/2 "2024-06-06T23:49:26Z")
Maybe this will help: [Creality\_Sonic\_Pad/printer\_configrations/printer-CrM4-401.cfg at main · CrealityOfficial/Creality\_Sonic\_Pad · GitHub](https://github.com/CrealityOfficial/Creality_Sonic_Pad/blob/main/printer_configrations/printer-CrM4-401.cfg) ---
**Author:** ![Sineos](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/sineos/32/18_2.png) [@Sineos](https://klipper.discourse.group/u/Sineos)\ **Post date:** [June 7, 2024, 11:41am UTC](https://klipper.discourse.group/t/how-do-i-request-a-config-file-for-the-cr-m4-stock-and-octopus-max-ez/16106/3 "2024-06-07T11:41:48Z")
Refer to the comment here: [Change KAMP Temperature for Mesh probing - #20 by Sineos](https://klipper.discourse.group/t/change-kamp-temperature-for-mesh-probing/16008/20) You should be aware that it is entirely possible that switching out the board on this printer is far from being as straight forward as you might wish for (even might be impossible without investing significant development work) ---
**Author:** ![EddyMI3D](https://yyz2.discourse-cdn.com/free1/user_avatar/klipper.discourse.group/eddymi3d/32/1981_2.png) [@EddyMI3D](https://klipper.discourse.group/u/EddyMI3D)\ **Post date:** [August 5, 2024, 10:24am UTC](https://klipper.discourse.group/t/how-do-i-request-a-config-file-for-the-cr-m4-stock-and-octopus-max-ez/16106/4 "2024-08-05T10:24:21Z")